Moisture Resistant Butt & Bead MDF Panel – 2440 x 1220 x 9mm

£47.49 (Excl. VAT)
£56.99 (Incl. VAT)

Pre-primed moisture-resistant butt and bead MDF ready to install straight from the van. Tongue and groove edges create clean joints while the button bead MDF pattern adds character to any room. A white primer coat means you can paint it any colour you want without extra preparation.

Out of stock

Description

Material Specifications

  • 9mm moisture-resistant MDF core
  • White primer coat applied at the factory
  • FSC certified from managed forests
  • Vertical grain pattern runs across the 1220mm width
  • Tongue and groove edges on long sides

Panel Details

  • Bead spacing: Even intervals across the board
  • Groove depth: 3mm for shadow line effect
  • Surface finish: Smooth white primer, ready to paint
  • Edge profile: Precision-machined tongue and groove
  • Moisture resistance: Enhanced resin bonding

Physical Properties

  • Sheet size: 2440mm x 1220mm x 9mm
  • Coverage per sheet: 2.98 square metres
  • Weight: Approximately 18kg per sheet
  • Density: Medium-density fibreboard core
  • Fire rating: Class E (standard MDF classification)

Installation Features

  • Tongue and groove system for gap-free joints
  • No visible fixings when properly installed
  • Can be secret-nailed through the tongue
  • Cuts cleanly with standard woodworking tools

Technical Specifications

Property Specification
Nominal Thickness 9mm
Sheet Dimensions 2440mm x 1220mm
Material Type Moisture-resistant MDF
Surface Finish White primer coat
Edge Profile Tongue and groove
Bead Pattern Vertical grain (short grain)
Bead Direction Across 1220mm width
Moisture Rating Enhanced moisture resistance
Certification FSC certified
Fire Rating Class E
Usage Interior applications only

Key Features

What’s Included

  • Full size sheet: 2440mm x 1220mm x 9mm
  • Factory-applied white primer coat
  • Precision tongue and groove edges
  • Reed and bead mdf panelling pattern ready to install

Each sheet covers nearly 3 square metres, so calculate your wall area and round up to the nearest whole sheet.

Suitable Applications

  • Wall panelling in living rooms and bedrooms
  • Bathroom and kitchen panels (moisture resistant)
  • Reception desks and commercial fit-outs
  • Shop fittings and display areas
  • Ceiling applications where height allows

The MDF bead and butt board design works well in both traditional and modern interiors.

Installation Benefits

  • No need for separate priming: Factory white coat saves time and materials
  • Tongue and groove system: Creates professional-looking joints without gaps
  • Moisture resistance: Won’t swell or warp in humid conditions like standard MDF
  • Easy cutting: Standard circular saw or jigsaw cuts clean lines
  • Flexible fixing: Can be nailed, screwed or glued depending on application

Finishing Options

  • Paint directly over primer: Any water-based or oil-based topcoat works
  • Light sanding: Quick sand with 240 grit for an extra-smooth finish
  • Fill nail holes: Use standard wood filler, sand and paint
  • Maintenance: Wipe clean with a damp cloth, touch up paint as needed

FAQs

What’s the difference between short grain and long grain?

Short grain means the beads run across the 1220mm width. Long grain would have beads running along the 2440mm length. This version gives you more beads per sheet.

Can I use this in a bathroom?

Yes, the moisture-resistant core handles humid conditions better than standard MDF. Still needs painting to fully seal the surface for wet areas.

How many sheets do I need for my room?

Measure your wall area in square metres and divide by 2.98 (coverage per sheet). Add 10% for cuts and waste.

Can you cut it to size?

Yes, our joinery team cuts any size you need. Bring your measurements or order online with cutting instructions.

What paint should I use over the primer?

Any good-grade emulsion or satinwood works well. The white primer gives you a clean base for any colour.

How do I fix the tongue and groove edges?

Nail through the tongue at 45 degrees so the next board covers the fixings. Use 40mm lost head nails for 9mm boards.

Ready When You Need It

In stock at our Scunthorpe branch. Order online for collection in under an hour. Local delivery within 48 hours using our own vans.

Free delivery on orders over £500 + VAT within 45 miles of Scunthorpe.

Need it cut to size? Our joinery team handles all cutting in-house. No delays, no extra trips.

Reviews

There are no reviews yet.

Be the first to review “Moisture Resistant Butt & Bead MDF Panel – 2440 x 1220 x 9mm”
This site uses User Verification plugin to reduce spam. See how your comment data is processed.
0 0 Reviews

Reviews

There are no reviews yet.

Be the first to review “Moisture Resistant Butt & Bead MDF Panel – 2440 x 1220 x 9mm”
This site uses User Verification plugin to reduce spam. See how your comment data is processed.

Questions